AC Powered Table Circular Saws

Package contents: - 1x Festool TKS 80 EBS Table Saw - 1x Dust extraction set - 1x Open-end spanner SW 23 - 1x Open-end spanner SW 50 - 1x Panther circular saw blade Festool TF80 A HW 254 x 2.4 x 30 mm - 1x Hex key SW 5 - 1x Stopper LA TKS 80 - 2x Cartridges KT TKS 80 - 1x Workpiece holder - 1x Sliding table ST TKS 80 - 1x Extension VB TKS 80 - 1x Extension VL TKS 80 - 1x Angle stop Product description: The table saw from Festool TKS 80 EBS guarantees maximum safety in the workshop. It is equipped with the sensitive SawStop technology, which ensures greater safety when sawing non-conductive metals. When it comes into contact with the skin, it stops immediately and melts into the work surface. It is also equipped with a cartridge that triggers a pre-tensioned spring and propels a piece of aluminium into the saw blade and which can be replaced very easily. Of course, this SawStop technology can also be deactivated, allowing the sawing of conductive materials. Every year, there are approximately 4,000 injuries due to the use of a circular saw, or 16 injuries per working day. About 26% of those seriously injured subsequently receive an allowance. These figures should appeal to every professional who would like to invest in his or her most valuable asset: body and integrity. This TKS 80 EBS ensures a high degree of flexibility during work owing to its longitudinal and angular stop, its 80 mm cutting height and its extendable work table. It also features an angle scale with stop points and fine adjustment, which is ideal for end and longitudinal cuts. Its left-hand tilting system ensures less damage to the workpiece. With a sliding table and a cutting depth of 20 mm, butt cuts up to a width of 820 mm can be performed easily. Even longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with extension are possible with ease. Its CLEANTEC suction sleeve guarantees a clear view and dust-free working. The tool garage provides space for saw blades, cartridges and workpiece holder. Festool is the leading manufacturer of high-quality power tools. Product description: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W No-load speed: 1700 - 3500 min-¹ Saw blade diameter: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height when folded: 385 mm Table height folded out: 900 mm Dust extraction connection diameter: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Saws: Uncertainty (noise) K: 3 dB

Read more less

Package contents: - 1x Festool TKS 80 EBS Table Saw - 1x Dust extraction set - 1x Open-end spanner SW 23 - 1x Open-end spanner SW 50 - 1x Special circular saw blade Festool TF80 A HW 254 x 2.4 x 30 mm - 1x Hex key SW 5 - 1x Stopper LA TKS 80 - 2x Cartridges KT TKS 80 - 1x Workpiece holder - 1x Sliding table ST TKS 80 - 1x Extension VB TKS 80 - 1x Extension VL TKS 80 - 1x Angle stop Product description: The table saw from Festool TKS 80 EBS guarantees maximum safety in the workshop. It is equipped with the sensitive SawStop technology, which ensures greater safety when sawing non-conductive metals. When it comes into contact with the skin, it stops immediately and melts into the work surface. It is also equipped with a cartridge that triggers a pre-tensioned spring and propels a piece of aluminium into the saw blade and which can be replaced very easily. Of course, this SawStop technology can also be deactivated, allowing the sawing of conductive materials. Every year, there are approximately 4,000 injuries due to the use of a circular saw, or 16 injuries per working day. About 26% of those seriously injured subsequently receive an allowance. These figures should appeal to every professional who would like to invest in his or her most valuable asset: body and integrity. This TKS 80 EBS ensures a high degree of flexibility during work owing to its longitudinal and angular stop, its 80 mm cutting height and its extendable work table. It also features an angle scale with stop points and fine adjustment, which is ideal for end and longitudinal cuts. Its left-hand tilting system ensures less damage to the workpiece. With a sliding table and a cutting depth of 20 mm, butt cuts up to a width of 820 mm can be performed easily. Even longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with extension are possible with ease. Its CLEANTEC suction sleeve guarantees a clear view and dust-free working. The tool garage provides space for saw blades, cartridges and workpiece holder. Festool is the leading manufacturer of high-quality power tools. Product description: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W No-load speed: 1700 - 3500 min-¹ Saw blade diameter: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height when folded: 385 mm Table height folded out: 900 mm Dust extraction connection diameter: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Saws: Uncertainty (noise) K: 3 dB

Read more less

Package contents: - 1x Festool Table circular saw TKS 80 EBS - 1x Dust extraction set - 1x Open-end wrench SW 23 - 1x Open-end wrench SW 50 - 1x HW universal saw blade W40 - 1x Circular saw blade Festool PW24 254 x 2.4 x 30 mm - 1x Allen bag SW 5 - 1x Stopper LA TKS 80 - 1x Cartridge KT TKS 80 - 1x Sliding stick - 1x Extension table ST TKS 80 - 1x Extension VB TKS 80 - 1x Guide Extension VL TKS 80 - 1x Angle stop Product description: The TKS 80 EBS table circular saw from Festool offers maximum safety in the workshop. It is equipped with the sensitive SawStop technology, which can be switched on and off as required, to ensure optimum safety when sawing insulating metals. If the saw comes into contact with the skin, it stops immediately and disappears into the work surface. It is also equipped with a quickly replaceable cartridge that releases a compressed spring and propels a block of aluminium into the saw blade. Every year there are about 4000 injuries caused by the use of a circular saw. This corresponds to 16 injuries per working day, but unlike other saws, the TKS 80 EBS offers accident insurance, giving users the opportunity to make the right choice for their wake work. With its 80 mm cutting height, extendable working length and longitudinal and angular stop, the Festool TKS 80 EBS offers great flexibility during work. In addition, the angle scale with stop points and fine adjustment, which is perfectly suited to butt and rip cuts, and the left-hand tilt of the saw blade make it suitable for all situations. With its sliding table and 20 mm cutting depth, the Festool TKS 80 EBS can easily make butt cuts up to 820 mm wide. Even longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with expansion are no problem. In addition, the CLEANTEC suction sleeve guarantees a clear view and dust-free working. The side-mounted tool shed provides storage space for saw blades, cartridges and the sliding stick. Festool is a power tool manufacturer with a reputation for high-quality tool design. Technical specifications: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W Idle engine speed: 1700 - 3500 min-¹ Saw blade diameter: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height, legs folded away: 385 mm Table height, legs unfolded: 900 mm Dust extraction connection diameter: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Saws: Uncertainty (noise) K: 3 dB

Read more less

Package contents: - 1x Festool Table circular saw TKS 80 EBS - 1x Dust extraction set - 1x Open-end wrench SW 23 - 1x Open-end wrench SW 50 - 1x HW universal saw blade W40 - 1x Circular saw blade Festool TF80 A 254 x 2,4 x 30 mm - 1x Allen bag SW 5 - 1x Stopper LA TKS 80 - 1x Cartridge KT TKS 80 - 1x Sliding stick - 1x Extension table ST TKS 80 - 1x Extension VB TKS 80 - 1x Guide Extension VL TKS 80 - 1x Angle stop Product description: The TKS 80 EBS table circular saw from Festool offers maximum safety in the workshop. It is equipped with the sensitive SawStop technology, which can be switched on and off as required, to ensure optimum safety when sawing insulating metals. If the saw comes into contact with the skin, it stops immediately and disappears into the work surface. It is also equipped with a quickly replaceable cartridge that releases a compressed spring and propels a block of aluminium into the saw blade. Every year there are about 4000 injuries caused by the use of a circular saw. This corresponds to 16 injuries per working day, but unlike other saws, the TKS 80 EBS offers accident insurance, giving users the opportunity to make the right choice for their wake work. With its 80 mm cutting height, extendable working length and longitudinal and angular stop, the Festool TKS 80 EBS offers great flexibility during work. In addition, the angle scale with stop points and fine adjustment, which is perfectly suited to butt and rip cuts, and the left-hand tilt of the saw blade make it suitable for all situations. With its sliding table and 20 mm cutting depth, the Festool TKS 80 EBS can easily make butt cuts up to 820 mm wide. Even longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with expansion are no problem. In addition, the CLEANTEC suction sleeve guarantees a clear view and dust-free working. The side-mounted tool shed provides storage space for saw blades, cartridges and the sliding stick. Festool is a power tool manufacturer with a reputation for high-quality tool design. Technical specifications: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W Idle engine speed: 1700 - 3500 min-¹ Saw blade diameter: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height, legs folded away: 385 mm Table height, legs unfolded: 900 mm Dust extraction connection diameter: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Saws: Uncertainty (noise) K: 3 dB

Read more less

Package contents: - 1x Festool TKS 80 EBS Table Saw - 1x Dust extraction set - 1x Open-end spanner SW 23 - 1x Open-end spanner SW 50 - 1x HW universal saw blade W40 - 1x Hex key SW 5 - 1x Stopper LA TKS 80 - 2x Cartridges KT TKS 80 - 1x Workpiece holder - 1x Sliding table ST TKS 80 - 1x Extension VB TKS 80 - 1x Extension VL TKS 80 - 1x Angle stop Product description: The table saw from Festool TKS 80 EBS guarantees maximum safety in the workshop. It is equipped with the sensitive SawStop technology, which ensures greater safety when sawing non-conductive metals. When it comes into contact with the skin, it stops immediately and melts into the work surface. It is also equipped with a cartridge that triggers a pre-tensioned spring and propels a piece of aluminium into the saw blade and which can be replaced very easily. Of course, this SawStop technology can also be deactivated, allowing the sawing of conductive materials. Every year, there are approximately 4,000 injuries due to the use of a circular saw, or 16 injuries per working day. About 26% of those seriously injured subsequently receive an allowance. These figures should appeal to every professional who would like to invest in his or her most valuable asset: body and integrity. This TKS 80 EBS ensures a high degree of flexibility during work owing to its longitudinal and angular stop, its 80 mm cutting height and its extendable work table. It also features an angle scale with stop points and fine adjustment, which is ideal for end and longitudinal cuts. Its left-hand tilting system ensures less damage to the workpiece. With a sliding table and a cutting depth of 20 mm, butt cuts up to a width of 820 mm can be performed easily. Even longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with extension are possible with ease. Its CLEANTEC suction sleeve guarantees a clear view and dust-free working. The tool garage provides space for saw blades, cartridges and workpiece holder. Festool is the leading manufacturer of high-quality power tools. Product description: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W No-load speed: 1700 - 3500 min-¹ Saw blade diameter: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height when folded: 385 mm Table height folded out: 900 mm Dust extraction connection diameter: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Saws: Uncertainty (noise) K: 3 dB

Read more less

Package contents: - 1x Festool Table Saw TKS 80 EBS - 1x Suction set - 1x Open-end spanner SW 23 - 1x Open-end spanner SW 50 - 1x HW Universal saw blade W40 - 1x Allen key SW 5 - 1x Longitudinal stop LA TKS 80 - 1x Cartridge KT TKS 80 - 1x Sliding stick - 1x Sliding table ST TKS 80 - 1x Extension VB TKS 80 - 1x Extension VL TKS 80 - 1x Angled stop Product description: The TKS 80 EBS table saw from Festool ensures maximum safety in the workshop. Its built-in sensitive SawStop technology ensures greater safety when sawing non-conductive metals. The saw will stop immediately upon skin contact and disappear into the work surface. The cartridge releases a pre-tensioned spring and shoots an aluminium block into the saw blade. The SawStop technology can also be switched off, so that conductive materials can then be sawn. After release, the cartridge can be replaced in a few simple steps. Every year there are about 4000 injuries when using a circular saw. This corresponds to 16 injuries per working day. Approximately 26 % of serious accidents are then covered by an accident pension. These figures should make every user think, and one should invest in his or her highest asset, the body and its integrity. The TKS 80 EBS can be used very flexibly. Whether a cutting height of 80 mm, the extendable working length or the longitudinal and crosscut fence, all this ensures great flexibility when working. The angle scale with locking points and fine adjustment is perfectly suited for crosscutting and longitudinal cuts. There is less tearing on the workpiece thanks to the left-hand swivelling of the saw blade. Crosscuts up to a width of 820 mm with sliding table are possible without any problems at a cutting depth of 20 mm. Longitudinal cuts up to a cutting height of 80 mm and a width of 600 mm with widening are also no problem. Moreover, the CLEANTEC extraction socket ensures a clear visibility and low-dust working. The side-mounted tool garage provides space for saw blades, cartridges and the sliding stick. Festool is a premium manufacturer of power tools, the high quality standards and the sophisticated tool concepts are what make this brand stand out. Technical specifications: Manufacturer: Festool Manufacturer number: 575828 Power consumption 2 200 W Idle speed: 1700 - 3500 min-¹ Saw blade Ø: 254 mm Cutting height 90°/45°: 80/56 mm Inclination: -2 / 47 ° Table dimensions: 690 x 580 mm Table height folded: 385 mm Table height folded out: 900 mm Dust extraction connection Ø: 27/36 mm Weight: 37 kg Drive type: Mains Sawing: A-weighted sound pressure level Lp: 87 dB(A) Sawing: A-weighted sound power level Lw: 102 dB(A) Sawing: uncertainty (noise) K: 3 dB

Read more less