Show previous products

• 

  ABUS ABUS cylinder padlock 85/50HB127 Lock body width 50 mm ( 3000280048 )

  Fri, 12/12/2025

  Scope of Delivery: - Cylinder padlock 85/50HB127 Lock body width 50 mm Product Description: Brass lock, corrosion-resistant and durable thanks to double locking (from 30 mm) and hardened steel shackle - Precision pin cylinder with mushroom head pins - Paracentric key profile for increased tamper protection - Automatic locking: locking without key by pressing down the shackle Technical Data: - Supplement: with high barFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €40,85

• 

  PFERD PFERD felt flap disc Ø 125 mm ( 8000430461 )

  Fri, 12/12/2025

  Scope of Delivery: - Felt flap disc Ø 125 mm Product Description: for pre-polishing and high-gloss polishing on medium to large components - due to their hardness and flexibility, they are used when geometric shapes must be precisely maintained - for use with polishing pastes - bore 22.23 mm Ø Technical Data: - Drive type: Angle grinder, cordless angle grinder - Application recommendation: Use the soft version for sanding and processing workpieces with very high contours. If very fine surfaces are to be achieved, the hard and soft versions can be used one after the other. - Version: W (soft) - Machinable materials: Nickel-based alloys (e.g. Inconell and Hasteloy), copper, aluminium, brass, bronze, hardened, tempered steels over 1,200 N/mm² (54 HRC, steels up to 1,200 N/mm² ( - Machining tasks: Polishing - Width: 22mm - Ø bore: 22.23mm - RPM, opt.: 1500RPM - Advantages: Low thermal load on the workpiece. Can be freely profiled and can therefore also be used for tools with complicated geometries. Optimum contour adaptation due to high flexibility. - RPM, max.: 7650RPMFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €175,75

• 

  BIRKENSTOCK BIRKENSTOCK Arizona Super Grip sandal size 44 black ( 4000379853 )

  Fri, 12/12/2025

  Scope of Delivery: - 1x BIRKENSTOCK sandal Arizona Super Grip size 44 black Product Description: in accordance with DIN EN ISO 20347 - Birko Flor® upper material - two straps with individually adjustable metal pin buckles - cushioning EVA midsole with slip-resistant, oil and grease-resistant rubber outsole - anatomically shaped cork-latex footbed - cover sole: suede leather sizes 36-40 are women's models with a narrow footbed sizes 41-46 are men's models with a normal footbed Technical Data: - Version: Men's modelFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €75,93

• 

  Irwin IRWIN one-handed clamp Quick Grip clamping width 900 mm ( 4000831433 )

  Fri, 12/12/2025

  Scope of Delivery: - One-handed clamp Quick Grip Clamping width 900 mm Product Description: for clamping and spreading - equipped with soft protective caps - free-sliding double T-bar for presetting the clamp - no bending under load - can also be used as a spreader bar - gentle, soft release - suitable for glue applications - Special product benefits: This one-handed clamp has a particularly high throat depth of 95 mm and a contact pressure of approx. 250 kg Technical Data: - Contact pressure: approx. 250kgFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €54,12

• 

  FAG Rodamiento de rodillos cilíndricos FAG N216 -E-M1 Ø interior 80 mm Ø exterior 140 mm (8000527889)

  Fri, 12/12/2025

  Alcance de la entrega: 1x rodamiento de rodillos cilíndricos FAG N216 -E-M1 Ø interior 80 mm Ø exterior 140 mm Descripción del Producto:

  Read more less

  1 - 2 business days

  €368,61

• 

  Gedore GEDORE Combination spanner 1 B SW 19 mm Length 258 mm ( 4000823644 )

  Fri, 12/12/2025

  Scope of Delivery: - 1x GEDORE Combination spanner 1 B SW 19 mm Length 258 mm Product Description: CV steel - chrome-plated - with equal spanner widths - ring side cranked and angled at 10°, jaw position 15° DIN 3113 Form B / ISO 3318 / ISO 7738 Technical Data: - Version: Form BFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €25,89

• 

  EDI EDI knob renovation plate 344 H ( 3000261364 ) stainless steel EST 92 mm PZ

  Fri, 12/12/2025

  Scope of Delivery: - 1x EDI knob renovation plate stainless steel EST 92 mm Product Description: Knob straight - visible screw connection - length 250 mm - width 54 mm - knob Ø 50 mm - - PZ perforation - plate thickness 8 mm - knob plates incl. roll change pin type O and wood screws 3.5x17 mm / EST 4.5x20 mm - deviations from standard TS please order the corresponding pin separately Technical Data: - Sign thickness: 8 mm - Mounting type: visible screw connection - Design: Knob straight - Knob depth: 41.5mm - Material: stainless steel - Surface finish: matt - Distance: 92 mm - for door thickness: 65-75 mm - Width: 54 mm - Length: 250 mm - Colour: EST - Hinge direction: DIN left / right - Perforation: PZ - Knob diameter: 50 mm - Model: 344 H - Brand: EDI For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €34,52

• 

  NORRES NORRES NEO 390 ONE suction and blower hose inner Ø 50-51 mm ( 4501400602 )

  Fri, 12/12/2025

  Scope of Delivery: - Suction and blower hose NEO 390 ONE inner Ø 50-51 mm Product Description: Applications: flexible hose for hot and cold gases, granulate dryer/plastic dryer, hot air dryer, film blowing system, cooling air on extrusion tool, cooling air: UV dryer, IR/infrared, dryer, bus, commercial vehicle, caravan, motorhome, boat, ship, yacht: ventilation, heating Properties: thread-reinforced, highly flexible, very good heat resistance, RoHS compliant Construction: 1. spring steel wire, 2. fabric-reinforced tape, wall: Neoprene-coated glass fabric, 3. cord as reinforcement Temperature range: -35 °C to 135 °C, briefly up to 150 °C Delivery variants: other versions, dimensions and lengths available on request Technical Data: - Bending radius: 30.00mm - Physical state: GaseousFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €133,69

• 

  NORRES NORRES suction and blower hose CP ARAMID 461 60 mm 72.00 mm ( 4501402998 )

  Fri, 12/12/2025

  Scope of Delivery: - 1x NORRES suction and blower hose CP ARAMID 461 60 mm 72.00 mm Product Description: Clamp profile hose, vibration-resistant (up to +300°C) Applications: - Flexible hose for hot and cold gases and for dusts, powders, fibres - Exhaust gas extraction, extraction of engine exhaust gases: Exhaust hose reel, suction slot duct, above-floor extraction system, under-floor extraction system - High-temperature extraction: Furnace, foundry, blast furnace, smelter, ceramics industry, glass industry, steelworks, aluminium smelter - Bellows, expansion joint Properties: Scuff protection due to external clamping profile - Tension-resistant clamping of the wall in the clamping profile - Highly flexible + compressible 4:1 - Vibration-resistant - Very good heat resistance - Good chemical resistance - Flame-retardant in accordance with: DIN 4102-B1 - Aramid wall: fire protection class "M1" according to UNE 23.727-90 - RoHS compliant Temperature range: -60°C to 260°C - briefly up to 300°C Technical Data: - Bending radius: 28.00mm - Weight: 0.73kg/m - Physical state: GaseousFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €530,13

• 

  ADMIRAL Admiral construction/industrial hose Admi(R)Star 602 ( 4000353622 ) inner Ø 50 mm white

  Fri, 12/12/2025

  Scope of Delivery: - 1x ADMIRAL construction/industrial hose inner Ø 50 mm - 1 roll Product Description: rot-proof, abrasion-resistant and very flexible, increased flame resistance - complete with long, reusable and protected Storz couplings, rubberised inside Cover: light-coloured polyester yarn, 2-ply woven Core: SBR, black, smooth Temperature range: -20 °C to + 80 °C Areas of application: Industry, construction Technical Data: - subject to testing: yes - Physical state: Solid - Inside Ø: 50 mm - Operating pressure: 10 bar - Burst pressure: 30 bar - Version: Storz C - Length: 20 m - Temperature range: - 20 to + 80 °C - Wall thickness: approx. 2 mm - Colour: white - Inner core: SBR - Interlining: light-coloured polyester yarn, 2F woven - Outer cover: Industrial yarn - Inner Ø (inch): 2 ″ - Material: SBR, light-coloured polyester yarn, 2F woven, industrial yarn - Maximum temperature: 80 °C - Outer Ø: 54 mm - External resistance: Abrasion resistant - Application: Industrial hose - Brand: ADMIRALFor commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €53,81

• 

  OGRO Ogro fire protection set CORE+8100/6501/6612 ( 3000700075 ) stainless steel ER D/D DIN left / right

  Fri, 12/12/2025

  Scope of Delivery: - 1x OGRO fire protection set stainless steel ER D/D Product Description: Fire-resistant escutcheon set - DIN left / right - square 9 mm - lever handle set = lever handle on both sides / interchangeable set = outside knob 3020 - for door thickness 38-63 mm Removal option for lever handle hole parts using standard circlip pliers. Optimum installation using M5 TORX screws Supplied as a complete set Technical Data: - Supplement: D/D - Bearing: fixed / fixed-turnable - Square: 9mm - Version: lever handle set - Surface: matt - Material: Stainless steel - for door thickness: 38 - 63 mm - Direction: DIN left / right - Perforation: PZ - Utilisation category: 4 - Pin: 114FS - Cover: round - Escutcheon thickness: 9 mm - Lever handle length: 143 mm - Type: Rosette - Lever handle fixing: Lever handle pin - Lever handle depth: 64 mm - Brand: OGRO - Ø: 55 mm - Colour no.: ER - Standard: EN 179 - Model: CORE+8100/6501/6612For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €81,02

• 

  RIEGLER RIEGLER brass ball valve VALVE LINE 59.61 mm G 2 ″ ( 4588880178 )

  Fri, 12/12/2025

  Scope of Delivery: - 1x RIEGLER brass ball valve VALVE LINE 59.61 mm G 2 ″ Product Description: 2-way brass ball valve with full bore - extremely inexpensive standard ball valve made of nickel-plated brass - for compressed air, water, non-toxic and non-aggressive gases and liquids - G-thread to DIN EN ISO 228-1 Technical Data: - A: 160mm - Stem seal: NBR - Ball seal: PTFE - L: 99mm - B: 79mmFor commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €38,21

Show more products