Show previous products

• 

  Options

  Bosch Professional Bosch GSB 18V-150 C Professional cordless impact drill 18 V 150 Nm Biturbo Brushless + 2x rechargeable battery 5.0 Ah + charger + L-Boxx

  Scope of Delivery: - 1x Bosch GSB 18V-150 C Professional cordless impact drill 18 V - 1x additional handle - 2x Bosch GBA 18 Volt 5.0 Ah battery ( 2607337069 ) - 1x Bosch GAL 18V-40 charger ( 1600A019RJ ) - 1x L-Boxx - 1x suitable insert Product Description: The Bosch GSB 18V-150 C Professional cordless impact drill impresses with its 150 Newton metres of torque paired with Biturbo technology. It also features precise Electronic Angle Detection, which always ensures the correct angle for long screws. The KickBack Control is also installed. The robust metal drill chuck and metal gearbox promise a long service life and a lot of enjoyment during use. The Bosch Connectivity Module (not included) is also compatible. The GSB 18V-150 C Professional delivers optimum results when screwing and drilling in wood and metal, but of course the impact function is also suitable for all kinds of masonry. An LED light is of course installed. One of the machine's highlights is the three torque settings. These are 84 Nm in the soft setting, 100 Nm in the hard setting and 150 Nm in the maximum setting. Important to know: Biturbo devices must be operated with ProCore batteries from 5.5 amps. With smaller batteries, the performance of the device is licenced. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch - Manufacturer's designation: GSB 18V-150 C - Torque (max.): 150 Nm - Torque (soft/hard/max.): 84 / 100 / 150 Nm - Idle speed (1st gear / 2nd gear): 0 - 550 / 0 - 2,200 min-1 - Battery type: Lithium-ion - Impact rate, max.: 30,000 bpm - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Battery voltage: 18 V - Torque levels: 25+2 - Screw Ø, max.: 13 mm - Drill Ø wood, max.: 150 mm - Drill Ø steel, max.: 16 mm - Drilling Ø masonry, max.: 20 mm - Vibration emission value ah: 1.5 m/s² - Uncertainty K: 2.5 m/s² - Vibration emission value ah: 1.5 m/s² - Uncertainty K: 9.5 m/s² - Sound pressure level: 94 dB(A) - Sound power level: 105 dB(A) - Uncertainty K: 5 dB - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €482,57

  Options

• 

  Options

  Makita Makita HP 333 DSAW cordless impact drill 12 V 30 Nm white + 1x battery 2.0 Ah + charger + case

  Scope of Delivery: - 1x Makita HP 333 cordless hammer drill - 1x Makita 2.0 Ah BL1021B battery - 1x Makita DC10SB charger - 1x case Product Description: With the HP 333, Makita offers a compact and powerful cordless impact drill for screwdriving, drilling or impact drilling. The hammer mechanism can be switched off manually. The HP 333 has a 2-speed gearbox and electrically adjustable speed. The built-in LED lamp with afterglow function ensures that you always have an optimal view of the drilling site. Makita is a leading manufacturer of power tools, characterised above all by high quality workmanship and a long tradition. Technical Data: - Manufacturer: Makita - Manufacturer's designation: HP 333 - Voltage: 12 volts - Voltage: 12 V - No-load speed: 0 - 450 / 0 - 1700 min⁻¹ - Idle stroke rate: 0 - 6750 / 0 - 25,500 min⁻¹ - Torque hard/soft: 30 / 14 Nm - Torque settings: 20 - Drilling capacity in wood: 21 mm - Drilling capacity in concrete: 8 mm - Drilling capacity in steel: 10 mm - Drill chuck capacity: 0.8 - 10 mm - Weight including battery (EPTA): 1.1 - 1.3 kg - Product dimensions (L x W x H): 193 x 66 x 229 mm - Sound power level (LWA): 93 dB(A) - Sound pressure level (LpA): 82 dB(A) - K-value noise: 3 dB(A) - Vibration: ≤ 2.5 m/s² - Vibration hammer drilling in concrete: 13.0 m/s² - K value vibration: 1.5 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €103,38

  Options

• 

  Options

  Makita Makita DHP 485 RF1 cordless impact drill 18 V 50 Nm brushless + 1x rechargeable battery 3.0 Ah + charger

  Scope of Delivery: - 1x Makita DHP 485 cordless impact drill driver - 1x BL 1830 B rechargeable battery with 3, 0 Ah - 18 V and LED charge level indicator - 1x Makita DC 18 RC 9.6 - 18 V battery Fast charger for Li-Ion battery (195584-2) Product Description: The Makita DHP 485 impact drill driver with 2-speed all-metal planetary gearbox has an impact mechanism that can be switched off. The integrated brushless motor ensures greater endurance, a longer service life and a more compact design. With bright LED. This impact drill driver is also particularly easy to handle thanks to its compact, short design. The speed can be sensitively adjusted. Technical Data: - Manufacturer: Makita - Manufacturer's description: DHP 485 - Battery voltage: 18 V - Torque (soft): 25 Nm - Torque (hard): 50 Nm - Motor type: brushless - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drill Ø wood/steel/stone: 38/13/13 mm - Drill chuck clamping width: 1.5-13 mm - Dimensions (LxWxH): 182x79x255 mm - Weight incl. packaging: 1410 g - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €182,42

  Options

• 

  Options

  Makita Makita DHP 458 Z cordless impact drill 18 V 91 Nm + 101 pcs. bit & drill socket spanner set

  Scope of Delivery: - 1x Makita DHP 458 18 V cordless impact drill driver - 1x Makita 101 pcs. tool set - 30x 25 mm bit assortment - 20x 50 mm bit assortment - 13x socket spanner - 4x hole saws - 1x hexagon socket - 6x drill bits for metal - 6x drill bits for stone - 6x drill bits for wood - 3x flat milling drill bits - 1x 60 mm magnetic bit extension - 1x magnetic bit holder - 1x centre punch - 1x spirit level 200 mm - 1x hole saw holder - 1x countersink - 2x screwdriving aids - 4x depth stops - 1x transport case Product Description: The DHP 458 impact drill driver is extremely powerful with maximum service life thanks to the powerful 2-speed all-metal planetary gearbox with switchable impact mechanism. The cordless screwdriver is equipped with clockwise/anticlockwise rotation, 21-stage torque regulation and a bright LED. The screwdriver can be stored and transported in the MAKPAC with matching insert to save space. The bit & drill set includes: 50x bits, 13x socket spanners, 1x Allen key, 6x HSS drill bits, 6x masonry drill bits, 6x wood drill bits, 3x flat wood drill bits, 1x bit holder, 4x hole saws, 1x drilling template, 4x drill plugs, 1x mandrel adapter, 1x bit driver with magnetic tip, 1x centring punch and 1x countersink. Technical Data: - Idle speed 1st gear: 0 - 400 rpmIdle speed 2nd gear: 0 -2,000 rpmIdle speed 1st gear: 0 - 6,000 min-1Idle speed 2nd gear: 0 - 30.000 min-1Torque soft: 58 NmTorque hard: 91 NmNominal voltage: 18 VDrill chuck clamping width: 1.5 - 13 mmDrill diameter wood: Ø 76 mmDrill diameter steel: Ø 13 mmDrill diameter stone: Ø 16 mmDimensions: 225x79x259 mmWeight (without battery): 2.0 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €154,18

  Options

• 

  Options

  Makita Makita DHP 453 FX12 cordless impact drill 18V 42Nm + 1x 3.0Ah + charger + 101-piece accessory set + case

  5 Reviews

  Scope of Delivery: - 1x Makita DHP 453 impact drill driver - 1x Makita Bl 1830 B 3.0Ah rechargeable battery - 1x Makita SD charger - 1x Makita case - 4x depth stop ( 3 mm / 5 mm / 8 mm / 10 mm ) - 1x drilling template - 1x spirit level - 1x bit screwdriver - 3x flat cutter bits ( 19 mm / 16 mm / 12 mm ) - 1x centre punch - 13x socket spanners ( 5 mm / 5.5 mm / 6 mm / 7 mm / 8 mm / 9 mm / 10 mm / 11 mm / 12 mm / 13 mm ) - 30x 25 mm bits ( PH1 / PH2 / PZ1 / PZ2 / PZ3 / T10 / T15 / T20 / T25 / T27 / T30 / H3 / H4 / H5 / H6 / SL3 / SL4 / SL4.5 / SL6 / SL7 / SL8 ) - 20x bit 50 mm ( PH1 / PH2 / PH3 / PZ1 / PZ2 / PZ3 / T10 / T20 / T25 / T27 / H3 / H4 7 H5 / H6 / SL 3 / SL4 / SL4.5 ) - 1x magnetic bit holder - 1x mandrel adapter - 1x bit stopper - 1x drill countersink - 4x Forstner bits ( 32 mm / 38 mm / 45 mm / 54 mm ) Product Description: The tool was developed for impact drilling in brick, concrete and stone as well as for impactless drilling in wood, metal, ceramic and plastic. The cordless impact drill has an impact mechanism that can be switched off, right/left rotation and electronic speed control. The drill is equipped with a precise 2-speed gearbox and is also suitable for fine drilling work thanks to infinitely variable speed control and torque limitation to 16 levels. The motor brakes guarantee more control as well as precise screwdriving work; the rubberised, ergonomic handle and compact design ensure a secure grip and comfortable working. Technical Data: - Rated voltage: 18 volts - Max. Torque (soft): 27 Nm - Max. Torque (hard): 42 Nm - Drill chuck clamping width: 1.5-13 mm - Idle speed 1st gear: 0-400 rpm - Idle speed 2nd gear: 0-1300 rpm - Idle speed 1st gear: 0-6,000 rpm - Idle speed 2nd gear: 0-19,000 rpm - Drill diameter steel: Ø 13 mm - Drilling diameter masonry: Ø 13 mm - Drilling diameter wood: Ø 36 mm - Total length: 214 mm - Sound pressure level: 83 dB(A) - Sound power level: 94 dB(A) - Deviation (K): 3 dB(A) - Vibration load (percussion drilling concrete): 10.0 m/s2 - Vibration load (drilling metal): 2.5 m/s2 or less - Deviation (K): 1.5 m/s2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €215,77

  Options

• 

  Options

  Makita Makita DHP 487 RTJ cordless impact drill 18 V 40 Nm brushless + 2x rechargeable battery 5.0 Ah + charger + Makpac

  23 Reviews

  Scope of Delivery: - 1x Makita DHP 487 Z cordless impact drill - 2x Makita BL 1850 B 18 V 5.0 Ah battery ( 197280-8 ) - 1x Makita DC 18 RC battery fast charger 7.2 V - 18 V ( 195584-2 ) - 1x Makita MAKPAC system case - 1x matching insert Product Description: The Makita DHP 487 is a very compact and versatile cordless impact drill. Its compact design makes it the ideal choice for working in hard-to-reach areas. The drill driver is equipped with a 2-speed planetary gearbox with a robust aluminium gearbox housing cover, which ensures easy screwing and drilling. In addition, the DHP 487 has a brushless motor (brushless), a motor brake, right/left rotation and a 13 mm quick-action drill chuck. In addition to drilling in wood and steel, the switchable percussion mechanism also enables drilling in masonry. Another feature is the built-in double LED with afterglow function, which provides good lighting conditions in poorly lit rooms. The ergonomically redesigned handle is intended to minimise damage to health, making long working days possible without any significant signs of fatigue. Makita is a leading manufacturer of power tools, high quality workmanship and a huge 18 V programme are among the company's trademarks. Technical Data: - Manufacturer: Makita - Manufacturer's description: DHP 487 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 500 / 1700 min-¹ - Torque hard/soft: 40 / 25 Nm - Torque settings: 20 - Drilling capacity in wood: 36 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 1.6 kg - Product dimensions (L x W x H): 150 x 81 x 232 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €320,30

  Options

• 

  Makita Makita DLX 2131 TJ cordless combo kit 18 V with DHP 482 62 Nm + DTD 152 165 Nm + 2x rechargeable battery 5.0 Ah + charger + Makpac

  Thu, 12/11/2025

  Scope of Delivery: - 1x Makita DHP 482 cordless impact drill - 1x belt clip - 1x Makita DTD 152 cordless impact wrench - 2x Makita BL 1850 B 18 V 5.0 Ah rechargeable battery - 1x Makita DC 18 RC charger - 1x Makita Makpac - 1x universal insert Product Description: The Makita DHP 482 impact drill driver with 2-speed all-metal planetary gearbox with metal gears and powerful 4-pole DC motor has a 21-speed torque setting plus extra drill setting and impact function. The XPT (eXtreme Protection Technology) protects the machine against dust and splash water, which significantly increases the service life of the screwdriver. The impact drill driver also impresses with its integrated LED light to illuminate the work area, the electronic motor brake and the 13 mm quick-release drill chuck. The powerful Makita DTD 152 cordless impact driver with its perfectly ergonomic handle and short design of just 138 mm is a must-have for every tradesman. Thanks to its robust design with protective caps on the housing and rubber seals against dust and splash water, the Makita DTD 152 impact wrench is extremely resilient. The integrated LED lighting also makes it easy to work in less well-lit areas. Technical Data: - DHP 482: - Idle speed 1st gear: 0-600 min-1 - Idle speed 2nd gear: 0-1900 min-1 - Idle speed 1st gear: 0-9000 min-1 - Idle speed 2nd gear: 0-28500 min-1 - Drilling capacity in wood: 38 mm - Drilling capacity in steel: 13 mm - Drilling capacity in masonry: 13 mm - Torque soft: 36 Nm - Torque hard: 62 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery voltage: 18 V - Dimensions (LxWxH): 198x79x249 mm - Weight without battery: 1.5 kg - DTD 152: - Battery voltage: 18 V - Hard torque: 165 Nm - Tool holder: 1/4" - Idle speed: 0-2900 rpm - No-load impact speed: 0 - 3500 min-1 - Standard screws: M5-M16 - Machine screws: M4-M8 - Dimensions (LxWxH) mm: 137x79x238 - Weight (without battery): 0.97 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €395,52

• 

  DEWALT DeWalt DCD 796 M2 cordless impact drill brushless 18V 70Nm + 2x rechargeable batteries 4.0 Ah + 1x quick charger in TSTAK

  Thu, 12/11/2025

  Scope of Delivery: - 1x DeWalt DCD 796 cordless impact drill driver - 2x DeWalt DCB 182 4.0 Ah XR rechargeable battery - 1x DeWalt DCB 113 charger - 1x DeWalt TSTAK tool case - 1x magnetic bit holder - 1x belt hook Product Description: The new cordless impact drill driver with its powerful high-performance motor ensures comfortable working even with the heaviest applications. The brushless motor works without carbon brushes and is therefore absolutely wear-free. The elegantly coordinated 2-speed full metal gearbox makes efficient work even easier. A selectable impact mechanism enables heavy-duty drilling work in stone and masonry. The impact drill driver sits comfortably in the hand thanks to its compact and well-balanced design. The rubberised and ergonomically designed handle also ensures safety and comfort. Another brand new feature is the built-in innovative 3-stage LED, which now impresses with a light intensity of 77 lumens and an optimally aligned light cone. The safety electronics enable problem-free long-term use, whereby the battery temperature, current drain and discharge protection are constantly monitored. The rechargeable batteries with 4 Ah battery capacity impress with their compact design and robust housing. Their Li-Ion technology maximises the service life and runtime of the batteries. They can be used for all 18 V XR Li-Ion tools from DeWalt. The batteries are also equipped with an LED capacity indicator for an optimum overview of the charge. The charger charges all DEWALT XR slide batteries from 10.8-18.0 volts. The DEWALT 2-stage charging process ensures a long battery life with maximum storage capacity. The LED display provides information on the battery and charge status. With its 3 mm thick walls and bi-metal comfort handle, the case is robust yet easy to transport. Technical Data: - Rated voltage: 18 V - Drill chuck clamping width: 1.5-13 mm - Idle speed 1st gear: 0-550 rpm - Idle speed 2nd gear: 0-2000 rpm - Idle stroke rate 1st gear: 0-9350 strokes/min - Idle speed 2nd gear: 0-34000 blows/min - Max. Torque 1st gear (hard): 70 Nm - Max. Torque 2nd gear (soft): 27 Nm - Maximum drilling capacity (wood): 40 mm - Maximum drilling capacity (metal): 13 mm - Maximum drilling capacity (masonry): 13 mm - Weight (without battery): 1250g - LxWxH (mm): 190x67x203 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €201,60

• 

  Options

  Makita Makita DHP 484 RF cordless impact drill 18 V 54 Nm brushless + 2x rechargeable battery 3.0 Ah + charger

  Scope of Delivery: - 1x Makita DHP 484 cordless impact drill 18V 54 Nm brushless - 2x Makita BL 1830 B battery with 3, 0 Ah 18 V - 1x Makita DC 18 RC 9.6 - 18 V battery charger (195584-2) Product Description: The Makita DHP 484 Z 18 V Li-Ion cordless impact drill is ideal for impact drilling in brick, stone and concrete. The built-in brushless motor works efficiently and is virtually wear-free. In addition, the device can also be used for screwing in screws and drilling without impact in metal, wood, plastic and ceramics without any problems. The impact drill driver has a 2-speed full metal planetary gearbox. Technical Data: - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-2000 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-30000 min-1 - Drilling capacity in wood: 38 mm - Drilling capacity in steel: 13 mm - Drilling capacity in masonry: 13 mm - Torque soft: 30 Nm - Torque hard: 54 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery voltage: 18 V - Dimensions (LxWxH): 189x79x244 mm - Weight without battery: 1.6 kg - Sound pressure level (Lpa): 88 dB(A) - Sound power level (Lwa): 99 dB(A) - K-value noise: 3 dB(A) - Vibration drilling metal: 2.5 m/s^2 - K-value vibration: 1.5 m/s^2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €283,10

  Options

• 

  Options

  Makita Makita DHP 484 T1J cordless impact drill 18 V 54 Nm brushless + 1x rechargeable battery 5.0 Ah + Makpac - without charger

  Scope of Delivery: - 1x Makita DHP 484 cordless impact drill - 1x Makita BL 1850 B Li-Ion battery 18V 5.0 Ah - 1x Makpac - 1x universal insert - without charger Product Description: The Makita DHP 484 Z 18 V Li-Ion cordless impact drill is ideal for impact drilling in brick, stone and concrete. The built-in brushless motor works efficiently and is virtually wear-free. In addition, the device can also be used to screw in screws and drill without impact in metal, wood, plastic and ceramics without any problems. The impact drill driver has a 2-speed full metal planetary gearbox. Technical Data: - Idle speed 1st gear: 0-500 min-1 - Idle speed 2nd gear: 0-2000 min-1 - Idle speed 1st gear: 0-7500 min-1 - Idle speed 2nd gear: 0-30000 min-1 - Drilling capacity in wood: 38 mm - Drilling capacity in steel: 13 mm - Drilling capacity in masonry: 13 mm - Torque soft: 30 Nm - Torque hard: 54 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery voltage: 18 V - Dimensions (LxWxH): 189x79x244 mm - Weight without battery: 1.6 kg - Sound pressure level (Lpa): 88 dB(A) - Sound power level (Lwa): 99 dB(A) - K-value noise: 3 dB(A) - Vibration drilling metal: 2.5 m/s^2 - K-value vibration: 1.5 m/s^2 - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €255,20

  Options

• 

  Bosch Professional Bosch GSB 18V-90 C Professional cordless impact drill 18 V 64 Nm brushless + 1x ProCORE rechargeable battery 4.0 Ah + L-Boxx - without charger

  Thu, 12/11/2025

  Scope of Delivery: - 1x Bosch GSB 18V-90 C Professional cordless impact drill - 1x Bosch GBA 18 V 4.0 Ah ProCORE rechargeable battery ( 1600A016GB ) - 1x Bosch L-Boxx 136 ( 1600A012G0 ) - 1x L-BOXX insert for device ( 1600A02K83 ) - without charger Product Description: With the GSB 18V-90 C, Bosch offers a compact and powerful cordless impact drill driver. The KickBack Control reduces the risk of injury by switching the impact drill off immediately if the machine becomes wedged. The brushless motor ensures a more compact design and longer service life thanks to reduced wear. Thanks to the Precision Clutch function, the machine is prevented from over-torquing once the preset torque has been reached, further reducing wear. Bosch Professional is a leading manufacturer of power tools of all kinds, characterised above all by its long tradition and high quality workmanship. Technical Data: - Manufacturer: Bosch Professional - Manufacturer's designation: GSB 18V-90 C Professional - Battery voltage: 18 V - Torque (soft / hard / max.): 36 / 64 / - Nm - Idle speed (1st gear / 2nd gear): 0 - 630 / 0 - 2,100 min-1 - Drill chuck clamping range, min./max.: 1.5 / 13 mm - Weight excl. battery: 1.2 kg - Torque levels: 21 - Drill Ø wood, max.: 68 mm - Drill Ø steel, max.: 13 mm - Screw Ø, max.: 12 mm - Vibration emission value ah: 1.5 m/s² - Uncertainty K: 1.2 m/s² - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  1 - 2 business days

  €264,97

• 

  Options

  Makita Makita DHP 487 RT cordless impact drill 18 V 40 Nm brushless + 2x rechargeable battery 5.0 Ah + charger

  23 Reviews

  Scope of Delivery: - 1x Makita DHP 487 Z cordless impact drill driver - 2x Makita BL 1850 B 18 V 5.0 Ah battery ( 197280-8 ) - 1x Makita DC 18 RC battery fast charger 7.2 V - 18 V ( 195584-2 ) Product Description: The Makita DHP 487 is a very compact and versatile cordless impact drill. Its compact design makes it the ideal choice for working in hard-to-reach areas. The drill driver is equipped with a 2-speed planetary gearbox with a robust aluminium gearbox housing cover, which ensures easy screwing and drilling. In addition, the DHP 487 has a brushless motor (brushless), a motor brake, right/left rotation and a 13 mm quick-action drill chuck. In addition to drilling in wood and steel, the switchable percussion mechanism also enables drilling in masonry. Another feature is the built-in double LED with afterglow function, which provides good lighting conditions in poorly lit rooms. The ergonomically redesigned handle is intended to minimise damage to health, making long working days possible without any significant signs of fatigue. Makita is a leading manufacturer of power tools, high quality workmanship and a huge 18 V programme are among the company's trademarks. Technical Data: - Manufacturer: Makita - Manufacturer designation: DHP 487 - Battery voltage: 18 V - Battery system: LXT - Battery protection system: Yes - Idle speed: 0 - 500 / 1700 min-¹ - Torque hard/soft: 40 / 25 Nm - Torque settings: 20 - Drilling capacity in wood: 36 mm - Drilling capacity in steel: 13 mm - Mounting: 1/2"-20UNF " - Drill chuck clamping width: 1.5 - 13 mm - Product weight: 1.6 kg - Product dimensions (L x W x H): 150 x 81 x 232 mm - Battery type (Ni-Cd / Li-Ion): Li-ion - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

  Read more less

  Pre-order

  €284,77

  Options

Show more products