Taladro de percusión inalámbrico TPC 18/4 de Festool

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Systainer SYS3 M 187 - without battery, without charger Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 2x Festool BP 18 Li 4,0Ah HPC-ASI 18 V 4,0 Ah battery - 1x Festool TCL 6 quick charger - 1x SYS3 M 187 Systainer Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: Product Description: Technical Data: For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Festool BP 18 Li 4.0 HPC-ASI 18 V 4.0 Ah rechargeable battery - 1x Festool TCL 6 quick charger - 1x SYS3 M 187 Systainer Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Festool BP 18 Li 4.0 HPC-ASI 18 V 4.0 Ah rechargeable battery - 1x SYS3 M 187 Systainer - without charger Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Festool BP 18 Li 3.0 C 18 V 3.0 Ah battery - 1x SYS3 M 187 Systainer - without charger Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 2x Festool BP 18 Li 3.0 C 18 V 3.0 Ah battery - 1x Festool TCL 6 charger - 1x SYS3 M 187 Systainer Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x Festool BP 18 Li 3.0 C 18 V 3.0 Ah battery - 1x Festool TCL 6 charger - 1x SYS3 M 187 Systainer Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total vibration mean value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool MB 40 mobile drilling attachment ( 577970 ) - 1x hole line pin 5 mm - 1x hole line pin 3 mm Product Description: The Festool MB 40 mobile drilling attachment is the perfect helper for precise and repeatable drilling, no matter where you are working. As a compact and stable drilling aid, it guarantees precise, right-angled drill holes and is particularly useful for vertical drill holes, face holes and holes in rows. With the optional depth setting, the drilling depth can be precisely adjusted up to 50 mm and can be read in both mm and inches. Particularly noteworthy is the unique hole row function for holes in the 32-hole system, which enables the holes to be arranged evenly. The quick and tool-free mounting of the tool chuck makes it easy to change drilling tools, especially with the CENTROTEC chuck, which ensures quick insertion and replacement. The extraction system can be coupled directly to the base plate for optimum visibility of the drilling site, which also ensures a clean working environment. Thanks to the rubberised base, the MB 40 drill attachment always remains stable and ensures precise alignment without slipping. The mobile drill attachment is the ideal extension for your Festool cordless drill driver and offers a wide range of applications for drilling in wood, metal and plastic. With this practical accessory, you can expand the application possibilities of your Festool tools and ensure the necessary precision for every drilling application. Technical Data: - Manufacturer: Festool - Manufacturer's designation: MB 40 - Manufacturer number: 577970 - Mounting: FastFix - Compatible with: CXS 12 / TXS 12 / CXS 18 / TXS 18 / TPC 18/4 / TDC 18/4 / C 18 / T 18 - Max. Drilling diameter softwood (Forstner bit): 40.00 mm - Max. Drilling diameter softwood (auger bit): 16.00 mm - Base plate dimensions: 110 x 114 mm - Height: 312.00 mm - Adjustment range depth stop: 0 - 50 mm - Max. Max. screw diameter (fastening templates/jigs): 4.00 mm - Stroke with depth stop, incl. spring: 187.00 mm - Stroke without depth stop, without spring: 203.00 mm - Dust extraction connection Ø: 27 mm - Product weight without accessories: 1.40 kg - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x SYS3 M 188 Systainer - 2x Festool BP 18 Li 4,0 HPC-ASI battery 18 V 4,0 Ah ( 205034 ) - 1x Festool SCA 16 quick charger 10.8 V - 18 V 16 A ( 576953 ) Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total average vibration value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Scope of Delivery: - 1x Festool TPC 18/4 cordless impact drill - 1x PZ 2 bit - 1x CENTROTEC magnetic bit holder BH 60 CE-Imp - 1x CENTROTEC tool chuck - 1x FastFix quick-action drill chuck 13 mm KC 13-1/2-MMFP - 1x additional handle - 1x belt clip - 1x SYS3 M 187 Systainer - 1x Festool BP 18 Li 4,0 HPC-ASI battery 18 V 4,0 Ah ( 205034 ) - 1x Festool SCA 16 quick charger 10.8 V - 18 V 16 A ( 576953 ) Product Description: With the TPC 18/4, Festool offers a powerful cordless impact drill for the highest demands. The combination of a handy design and enormous power enables comfortable and effective work. Thanks to the 4 different gears, the drill driver can be optimised for all applications. This means that screwing with 50 Nm is just as possible in 1st gear as drilling in 4th gear at 3600 rpm. The brushless EC-TEC motor combines enormous resilience and endurance with low wear and therefore a long service life. Thanks to the FastFix interface, the attachments can be changed quickly and without tools. The KickbackStop function minimises the risk of serious injury when the drill driver jams by stopping the motor, thereby protecting the user's health. Festool is a premium manufacturer of power tools that is characterised above all by its long tradition and very high quality workmanship. Technical Data: - Manufacturer: Festool - Manufacturer's designation: TPC 18/4 - Manufacturer number: 575604 - Battery voltage: 18 V - Gears: 4 - Idle speed 1st/2nd gear: 0 - 500/0 - 800 min-¹ - Idle speed 3rd/4th gear: 0 - 2350/0 - 3600 min-¹ - Max. Impact speed: 57600.00 min-¹ - Drilling diameter wood/steel: 70/13 mm - Drilling diameter masonry (brick): 10.00 mm - Torque setting 1st/2nd gear: 2 - 20/2 - 20 Nm - Max. Torque wood/steel: 50/75 Nm - Drill chuck clamping width: 1.5 - 13 mm - Battery capacity: 4.0/5.2 Ah - Product weight with battery: 1.9/2.0 kg - Drive type: Battery - Impact drilling in concrete: Total mean vibration value ah: 14.00 m/s² - Impact drilling in concrete: Standards series EN: 62841 - Impact drilling in concrete: Uncertainty (noise) K: 5.00 dB - Impact drilling in concrete: Uncertainty (vibration) K: 1.50 m/s² - Impact drilling in concrete: A-weighted sound pressure level Lp: 94.00 dB(A) - Impact drilling in concrete: A-weighted sound power level Lw: 105.00 dB(A) - Drilling in metal: Overall vibration mean value ah: 3.00 m/s² - Drilling in metal: Standards series EN: 62841 - Drilling in metal: Uncertainty (noise) K: 5.00 dB - Drilling in metal: Uncertainty (vibration) K: 1.50 m/s² - Drilling in metal: A-weighted sound pressure level Lp: 73.00 dB(A) - Drilling in metal: A-weighted sound power level Lw: 84.00 dB(A) - Screws: Total average vibration value ah: 2.50 m/s² - Screws: Standards series EN: 62841 - Screws: Uncertainty (noise) K: 5.00 dB - Screws: Uncertainty (vibration) K: 1.50 m/s² - Screws: A-weighted sound pressure level Lp: 73.00 dB(A) - Screws: A-weighted sound power level Lw: 84.00 dB(A) - For commercial use, please observe the building regulations!For commercial use, please observe the building regulations!

Read more less

Potencia pura para cada aplicación combinada con robustez y resistencia indestructibles. Con el taladro percutor a batería TPC 18/4 y el taladro percutor a batería TID 18 estará preparado para cualquier tarea de taladrado y atornillado. El TPC 18/4 convence por el mejor concepto de conmutación que jamás haya utilizado. Numerosos accesorios, combinados con accesorios perfectamente coordinados, hacen del QUADRIVE un taladro de percusión insuperable para una amplia gama de aplicaciones. ¿Y una peligrosa torsión de muñeca cuando la herramienta de aplicación se bloquea repentinamente? El KickbackStop inteligente minimiza el riesgo de que llegue tan lejos. El TID 18, por el contrario, es un potente compacto con un mecanismo de percusión extremadamente robusto y con una vida útil enorme. Además, el TID 18 con portaherramientas de ¼” gira solo sobre el tornillo, no sobre la muñeca: el mecanismo de percusión tangencial lo garantiza sin que se produzca un retroceso de fuerza. Ambos convencen por su motor EC-TEC sin escobillas y, por tanto, libre de mantenimiento, que, en combinación con la batería, garantiza la máxima duración. Para un día a día sin preocupaciones, el atornillador inalámbrico y la batería están totalmente protegidos con el servicio de Festool. Dos destornilladores en un Systainer: pura potencia y robustez, idealmente combinados. Fortalezas y beneficios - Robusto: componentes de calidad y duraderos en la máquina y la batería, además completamente protegidos gracias a los servicios integrales de Festool Service - Máximo rendimiento: gracias al motor EC-TEC extremadamente potente, sin escobillas y, por tanto, duradero - Ergonómico: El mango optimizado garantiza una mejor ergonomía y, por tanto, un manejo más fácil gracias a su menor circunferencia - Cómodo: compartimento para puntas integrado, iluminación óptima del área de trabajo mediante LED, clip para cinturón que se puede montar por ambos lados - Móvil: empaquetados en el Systainer³, los destornilladores se pueden integrar perfectamente en el equipamiento del vehículo bott para facilitar su transporte desde el taller hasta la obra. - Sistema de batería flexible: Para aplicaciones con requisitos de alta potencia, el paquete de baterías Li-HighPower Compact de 4,0 Ah proporciona la combinación ideal de potencia, tamaño compacto y ligereza. - TPC 18/4: Potente para trabajos de atornillado y taladrado con diámetros grandes, rápido para un avance limpio del trabajo en diámetros más pequeños - TPC 18/4: Para obtener aún más potencia, la batería de 5,0 Ah es la elección correcta para aplicaciones de taladrado y atornillado especialmente pesadas - TPC 18/4: gracias a la interfaz FastFix, conversión rápida y sin herramientas a taladrado, atornillado, taladrado angular y tornillos angulares - TID 18: Seguro: el mecanismo de impacto tangencial sin retroceso protege la muñeca - TID 18: montaje de ¼” sin herramientas Áreas clave de aplicación - TID 18: Trabajos de atornillado cómodos para la muñeca y sin contrapresión - TID 18: Tornillos en madera hasta 8 x 220 mm - TPC 18/4: tornillos en madera hasta 10 x 300 mm - TPC 18/4: Taladrar en madera hasta 70 mm con puntas Forstner - TPC 18/4: Perforación con impacto en ladrillo y mampostería - TPC 18/4: El KickbackStop inteligente garantiza una mayor seguridad al taladrar y atornillar Alcance de la entrega Llave de impacto a batería TID 18, taladro de impacto a batería TPC 18/4, batería BP 18 Li 4.0 HPC-ASI, batería BP 18 Li 5.0 ASI, cargador rápido TCL 6, portabrocas sin llave FastFix 13 mm KC 13-1/2- MMFP, fijación en ángulo FastFix, asa adicional, clip para cinturón, Systainer SYS3 M 237 Datos técnicos: Tensión de la batería (tensión nominal) 18,00 V Capacidad de la batería 4,0/5,0 Ah Peso de transporte con accesorios incluidos 8,2 kg Tipo de unidad de batería Tecnología Bluetooth® Si se utiliza con fines comerciales, ¡tenga en cuenta las normas de construcción!

Read more less